RSS 36-D-ST 101213954
| Ordering details | |
| Product type description | RSS 36-D-ST |
| Article number | 101213954 |
| EAN Code | 4030661410623 |
| eCl@ss | 27-27-24-01 |
Подробно описание
| Mechanical data | |
| Design of electrical connection | Connector M12, 8-pole |
| mechanical installation conditions | not flush |
| Actuating planes | Actuation from side |
| Active area | lateral |
| Switch distance Sn | 12 mm |
| Ensured switch distance ON Sao | 10 mm |
| Ensured switch distance OFF Sar | 20 mm |
| hysteresis | max. 2 mm |
| Repeat accuracy R R | < 0,5 mm |
| notice | Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm. see drawing: Operating principle minimum distance 100 mm in case of approach from side |
| restistance to shock | 30 g / 11 ms |
| Resistance to vibration | 10 … 55 HZ, Amplitude 1 mm |
| Latching (Y/N) | No |
| Latching force | - |
| Ambient conditions | |
| Ambient temperature | |
| - Min. environmental temperature | −25 |
| - Max. environmental temperature | +70 |
| Storage and transport temperature | |
| - Min. Storage and transport temperature | −25 |
| - Max. Storage and transport temperature | +85 |
| Temperature resistance cable | |
| - min. Temperature resistance | −30 in position of rest, −10 in Movement |
| - max. Temperature resistance | +105 |
| Protection class | IP65, IP67, IP69 to IEC/EN 60529 |
| Protection rating | III |
| Air clearances and creepage distances To IEC/EN 60664-1 | |
| - Rated impulse withstand voltage Uimp | 0,8 kV |
| - Overvoltage category | III |
| - Degree of pollution | 3 |
| Electromagnetic compatibility (EMC) | |
| EMC rating | to IEC 60947-3 |
| Interfering radiation | to IEC 61000-6-4 |
| Electrical data | |
| Cross circuit/short circuit recognition possible (Y/N) | Yes |
| Voltage type | DC |
| Switch frequency | 1 |
| Rated insulation voltage Ui | 32 VDC |
| Rated operating voltage Ue (stabilised PELV) | |
| - Min. Rated operating voltage | 20.4 VDC |
| - Max. Rated operating voltage | 26.4 VDC |
| Operating current Ie | 0,6 A |
| No-load current I0 | 0,1 A |
| Required rated short-circuit current | 100 A |
| notice | The cable section of the interconnecting cable must be observed! Cable length and cable section alter the voltage drop depending on the output current |
| Electrical data - Safety inputs | |
| Safety inputs | X1 and X2 |
| Rated operating voltage Ue | 24 VDC −15% / +10% |
| Electrical data - Safety outputs | |
| Safety outputs | Y1 and Y2 |
| Fuse rating | short-circuit proof |
| Design of control output | p-type |
| Number of secure semi-conductor outputs | 2 |
| Max. output current at secured output | 0,25 A |
| Rated operating voltage | min. (Ue − 1 V) |
| Residual current Ir | ≤ 0,5 mA |
| Operating current Ie | max. 0,25 A |
| - Ambient temperature: −25 °C … +70 °C | ≤ 0,1 A |
| Minimum operating current Im | 0,5 mA |
| - Ambient temperature: −25 °C … +65 °C | ≤ 0,25 A |
| Utilisation category | DC-12: 24 V / 0,25 A DC-13: 24 V / 0,25 A |
| Voltage drop Ud | < 1 V |
| Electrical data - Diagnostic output | |
| Serial diagnostics (Y/N) | No |
| Fuse rating | short-circuit proof |
| Design of control output | p-type |
| Number of semi-conductor outputs with signaling function | 1 |
| Rated operating voltage | Ue < 2 V |
| Operating current Ie | max. 0,05 A |
| Utilisation category | DC-12: 24 V / 0,05 A DC-13: 24 V / 0,05 A |
| LED switching conditions display | |
| LED switching conditions display (Y/N) | Yes |
| Number of LED´s | 3 |
| green LED | Supply voltage |
| red LED | Error |
| yellow LED | switching condition |
| ATEX | |
| Explosion protection categories for gases | None |
| Explosion protected category for dusts | None |
| Dimensions | |
| Dimensions of the sensor | |
| - Width of sensor | 106.3 |
| - Height of sensor | 25 |
| - Length of sensor | 22 |
