MKSE52/WKT-19.4 101190916
| Mechanical data | |
| Design of electrical connection | Screw connection |
| Cable section | |
| - Min. Cable section | 0,5 |
| - Max. Cable section | 2.5 |
| Mechanical life | 10.000.000 operations |
| Switching frequency | 1200 s |
| notice | All indications about the cable section are including the conductor ferrules. |
| Actuating force | 11 |
| restistance to shock | 110 / 4 - 30 / 18 |
| Resistance to vibration | > 20 / 10 … 200 |
| Latching (Y/N) | Yes |
| Probing possible (Y/N) | No |
| Return to zero position (Y/N) | No |
| Latching position | left, right, above and bottom zero position |
| Number of switch positions | 4 |
| - Position A, B, C, D | |
| Number of directions | 4 |
| Front plate thickness | |
| - min. front plate thickness | 1.5 |
| - max. front plate thickness | 6 |
Подробно описание
| Ambient conditions | |
| Ambient temperature | |
| - Min. environmental temperature | −25 |
| - Max. environmental temperature | +80 |
| Protection class | IP65 / IP67 to IEC/EN 60529 |
| Degree of pollution | 3 IEC/EN 60947-1 |
| Electrical data | |
| Design of control element | 2 Normally open contact (NO) / 2 Normally open contact (NO) / 2 Normally open contact (NO) / 2 Normally open contact (NO) |
| Switching principle | Creep circuit element |
| Number of auxiliary contacts | 8 |
| Number of safety contacts | 0 |
| Rated impulse withstand voltage | 4 |
| Rated insulation voltage | 400 |
| Thermal test current | 10 A |
| Utilisation category | AC-15: 250 V / 8 A DC-13: 24 V / 5 A |
| Max. fuse rating | 10 A gG D-fuse |
| - galvanically separated contact bridges | Yes |
| Contacts at position | |
| - A | 2 Normally open contact (NO) |
| - B | 2 Normally open contact (NO) |
| - C | 2 Normally open contact (NO) |
| - D | 2 Normally open contact (NO) |
| Number of switching stages | 4 |
| Number of shutters per direction | 2 |
| ATEX | |
| Explosion protection categories for gases | None |
| Explosion protected category for dusts | None |
| Dimensions | |
| Dimensions | |
| - Length of the actuator | 77 |
| - Mounting depth | 112 |
| Hole of central anchorage, diameter | 22.7 |
| Mounting hole IEC/EN 60947-1 | 22.3 + 0,4 |
| Spacing | 80 x 80 |
